Feature :
Input Voltage: DC:9-60V
Operating Temperature:-40℃ ~ +85℃
Shell: IP40, Fanless design
Test Report: CCC, RoHS, FC, CE, ISO
Anti-static: 8KV-15KV
MTBF: 100000Hours
Overview:
ND-X820-2FX6TX Industrial Ethernet Switches uses store-forward architecture, fanless and energy-saving design. The advantage of product are small, convenient and easy to maintain. The product design complies with the Ethernet standard, adding lightning protection, anti-static protection measures. It applies to the wide range of operating temperature from -40℃ ~ +85℃ with stable and reliable performance. The device can be widely applied to various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, power, water conservancy and oil fields.
Input Voltage: DC:9-60V
Operating Temperature:-40℃ ~ +85℃
Shell: IP40, Fanless design
Test Report: CCC, RoHS, FC, CE, ISO
Anti-static: 8KV-15KV
MTBF: 100000Hours
Overview:
ND-X820-2FX6TX Industrial Ethernet Switches uses store-forward architecture, fanless and energy-saving design. The advantage of product are small, convenient and easy to maintain. The product design complies with the Ethernet standard, adding lightning protection, anti-static protection measures. It applies to the wide range of operating temperature from -40℃ ~ +85℃ with stable and reliable performance. The device can be widely applied to various broadband data transmission fields such as intelligent transportation, telecommunications, security, financial securities, customs, shipping, power, water conservancy and oil fields.
Product Name | 6 Port 10/100M Managed Industrial Fiber Switches |
Product Model | ND-X820M-2FX6TX-SC |
Interface | 6x 10/100Base-T Ethernet port + 2x 100M SC port + 1 Console port |
Network Protocols |
IEEE802.3 10BASE-T; IEEE802.3i 10Base-T;IEEE802.3u;100Base-TX/FX; IEEE802.3ab 1000Base-T; IEEE802.3z 1000Base-X; IEEE802.3x |
Network Media |
10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
Fiber Media |
Multi-mode: 2KM Single-mode: 20/40/60/80KM Interface:2*SC |
Performance Specification |
Bandwidth: 1.6Gbps Packet Buffer Memory:2Mbits 10 Mbps Packet Forwarding Rate:14880 pps/port 100Mbps Packet Forwarfding Rate:148800 pps/port MAC Address Table: 8K Forwarding Delay: <4us |
Forwarding Mode | Store-and-Forward |
Protection | 6KV Lightening protection, IP40 protection |
LED Indicators | Power: PWR; Link; Link/Act |
Power Supply |
Input Power: 12~48VDC (Terminal Block) Input Power:2* 12~48VDC(Dual power redundancy backup) Working Consumption : <5W Connectors : Phoenix terminal Overload protection :20A Reverse polarity protection : 120s Alarm contact : No |
Layer 2 Switching | |
Spanning Tree Protocol (STP) |
Standard Spanning Tree (STP) 802.1d Rapid Spanning Tree (RSTP) 802.1w Multiple Spanning Tree (MSTP) 802.1s |
G.8032 ERPS | <20ms ring protection for industrial high reliable application |
Aggregation |
Link Aggregation Control Protocol (LACP) IEEE 802.3ad; Up to 7 groups ; Up to 14 ports per group |
VLAN |
Support up to 4K VLANs simultaneously (out of 4096 VLAN IDs) ; Port-based VLAN; IEEE 802.1Q tag-based VLAN |
IGMP v1/v2 snooping |
IGMP limits bandwidth-intensive multicast traffic to only the requesters; Supports 256 multicast groups |
GMRP | supports GARP multicast registration protocol |
MAC |
Locks MAC Addresses to ports; Learned MAC address limiting; |
QOS |
Based on 802.1p (COS) classification; Based on DSCP classification Based on the source IP, destination IP, port number classification Support SP, WRR, DRR scheduling strategy; Support traffic speed limit CAR |
MPLS |
MPLS supports static LSP Support VPN MPLS |
Routing Protocols |
IPv4 software static routing IPv6 software static routing |
LLDP | supports LLDP link discovery protocol |
System management |
User add / delete user; User login, operation, status, event log Device reset, configuration save/restore, upgrade management, time setting |
Security | |
Secure Shell (SSH) Protocol |
SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported |
Secure Sockets Layer (SSL), HTTPS |
SSL encrypts the http traffic, allowing advance secure access to the browser- based management GUI in the switch |
Port Security | Locks MAC Addresses to ports, and limits learned MAC addresses |
DHCP Snooping |
Prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection |
ACLs |
Support for up to 256 entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag |
IP Source Guard | Prevents datagram with spoofed addresses from being in the network |
ARP Inspection | Prevent ARP spoofing attacks and ARP |
Storm control | Prevents traffic on a LAN from being disrupted by a broadcast, multicast,or unicast storm on a port |
Management (Web/ SSL, SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog) | |
Web GUI interface |
Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring |
Dual Image | Dual image provides independent primary and secondary OS files for backup while upgrading |
Firmware upgrade | Web browser upgrade (HTTP/ HTTPs) and TFTP; Upgrade through console port |
Port mirroring |
Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to N-1 (N is Switch’s Ports) ports can be mirrored to single destination port. A single session is supported. |
Other management | Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support) |
Other Specifications | |
Working Environment |
Working temperature: -40~+85℃ ; Storage temperature: -40~+85℃ Relative Humidity: 5%~95 %( no condensation) |
Industry Standard |
FCC CFR47 Part 15,EN55022/CISPR22, Class A EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±4kV/DM, ±6kV/CM; Data Port: ±4kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) IEC (EN) 61000-4-8:support IEC 60068-2-27(Shock):support IEC 60068-2-32(Freefall):support IEC 60068-2-6(Vibration):support |
Shell | IP40 protect grade, metal shell |
Installation | DIN-Rail or Wall mounts |
Packing List |
1×Industrial PoE Switch (plus terminal block) 1×User Manual/Certificate of quality/Warranty card 1×DIN-Rail mounting kit |
Certification |
CE mark, commercial; FCC Part 15 Class B; VCCI Class B EN 55022 (CISPR 22), Class B |
MTBF | 300,000 hours |
Weight & Size |
Product Weight: 0.9 KG Product size (L×W×H): 170mm× 160mm× 50mm |
Warranty | 3-years |
2*100Base-FX,6*10/100 Base-Tx Managed Fiber Switch ,SC port,Industrial , aluminum alloy, DIN Rail, DC12~48V power supply ,Wide temperature (-40°C-85°C) ,support WEB management/SNMP/VLAN .DC power supply is not included by default.